Manage indoor humidity levels to stop mold growth
One of the most notorious indoor pollutants in the United States is mold. Mold is known for its disastrous impacts on health, wellness, and property damage worldwide. This fungal organism, when it grows on your property, can cause severe damage to your otherwise perfectly clean environment. One of the most common reasons mold growth becomes possible is the increased humidity levels of your indoor property.
Call Mold Testers 954 for an expert mold remediation solution and get an expert to advise to control humidity levels.
Humidity a severe issue in Florida:
Substantially high humidity levels with moisture can provide perfect mold and mildew growth conditions. The average humidity levels go above 71% throughout the United States. In Florida alone, the intermediate humidity level was 75% in 2021. The climatic condition of Florida makes it perfectly prone to mold attack. Research has also shown that the complaints of mold damage have increased for residential and commercial properties over the last decade in Florida. High humidity levels and moisture content due to constant rain have contributed to indoor air humidity. High levels of moisture, dampness, and humidity can cause mold infestation, becoming a severe health hazard in the region.
Are you looking for a detailed analysis of humidity levels in Florida? Here is an in-depth article that can give you the correct information:
All you need to know about humidity
We all have heard about humidity but are often conflicted about what it means. Humidity is the amount of moisture content in the air. Human skin uses a layer of air to protect itself from losing body moisture. When the humidity level exceeds the ordinarily acceptable standard, air does not absorb the water, and the body cannot maintain its ideal temperature.
Humidity for indoor air quality
Indoor humidity levels must be maintained at or below 50% to attain the perfect air quality for the indoor environment. According to the Environmental Protection Agency (EPA), humidity levels must range from 30%-50%. Any level above 60% of humidity can lead to severe health and respiratory infections. Furthermore, the high humidity level can also cause discomfort, dryness of the air, and flaring up of asthma for patients. Other symptoms of high humidity include irritation of the eyes, headaches, dehydration, throat infections, and allergies. Most importantly. An unreasonable amount of moisture can even cause mold growth, which is one of the primary reasons for poor indoor air quality.
When is the humidity level called too high?
Many signs highlight the high level of humidity level. Looking at these signs can indicate there is a high chance of humidity:
- High levels of rainfalls
- Foggy condensation
- Mold and mildew growth
- Allergies and health issues
- Food going bad
- Damage to furniture
- Chipping off of paints
- Discomfort in sleeping
- Extreme dryness
How to measure home humidity levels?
You can check the humidity levels by using an instrument called the hygrometer. A hygrometer is a device used to prevent air temperature and humidity levels. Moreover, this device can also check the humidity level and provide accurate readings. If you check the humidity status exceedingly above 50%, you should seek professional help. Take immediate steps before it gets too late, or you might have to invest much more later.
What are the leading causes of the increase in indoor humidity levels?
If you witness bubbling paint on your walls, constant discomfort, and mold growing on your ceilings, you are probably succumbing to humidity damage. Here are the main causes that lead to an increase in humidity level:
- Showering spaces:
Washrooms and bathrooms are one of the most humid indoor environments. Showering places are filled with intense moisture content that leads to condensation indoors. Misting up of water, especially in hot showers, can lead to an increase in humidity. This is also a common reason why mold grows in showering places.
- Kitchen sink basin
Kitchen sink basins are where most of the washing and cleaning occurs. Moisture left on the sink basin can lead to severe humidity in the kitchen. Moreover, cooking places in the kitchen can also produce steam that leads to moisture in the air. This air is often also trapped when it reaches the ceiling.
- Laundry drying
Drying the laundry indoors can also allow the moisture to leave the clothes and become water vapors indoors. The water vapors become why the indoor humidity level increases, leading to a high humidity level.
- Poor ventilation
Air circulation is highly crucial to maintain good air quality indoors. However, lack of proper ventilation can become a severe problem as it allows air pollutants to leap into the air. It can also lead to mold growth and damage by pathogens.
- Dampness and moisture
We often witness old properties with porous walls, fungal growth, and rising dampness of the property. Dehumidifiers are the only way this moisture can be prevented, but often the condition is irreversible if the walls are highly damp.
It is always better to prevent these factors that can lead to a problem that can damage your health and property in the long run. Insulation of the house, use of humidifiers and air purifiers, and constant monitoring of air quality by professionals can prevent such damage.
Finding the best solution for the prevention of humidity in your indoor environment:
Many assume that humidity levels can be controlled by using dehumidifiers and air purifiers. While these cleaners are ideal for improving air quality, it is often attainable with expert supervision. Experts will analyze your property and undergo testing of air quality to find the amount of moisture and humidity in your indoor environment. If the humidity level is above acceptable, they will provide you with the ideal solution to prevent further damage. Experts understand the perfect solutions to insulate your property, dehumidify, and offer solutions that can be beneficial in the future.
Mold Testers 954 is a company built on years of experience, expertise, and quality tools. We provide you with temporary removal and a complete solution for problems related to poor air quality, humidity, high moisture levels, and mold growth.
Mold Testers 954 for mold damage and restoration:
Mold Testers 954 is a company with years of professional experience in mold remediation. We analyze your property and also undergo air quality testing to measure moisture content in your environment. If detected, our deal provides tailor-fit solutions per your property’s requirements to remove humidity and moisture and improve air quality.
Call us today at 954-274-4118 or leave us an email at hello@moldtesters954.com to get in contact with our experts.
